| 01/W
Series |
Initialization: Hold Reset and Compare while turning it on. |
Preload: Global screen 7 Press G then E |
ROM Check:
Hold Reset while turning it on. |
| 03R/W |
Initialization: Hold Edit and 1 while turning it on. |
Preload:
Global screen 5D, then select “OK”. |
ROM
Check: Hold +1 and -1 while turning it on. |
| 05R/W |
Initialization: Hold Edit and 1 while turning it on. |
Preload:
Global Screen 5A, then select “OK”. |
ROM
Check: Hold Edit and Global/Multi while turning it on. |
| 168RC |
Initialization: Hold leftmost Knob under screen and Up and Down while turning it
on. |
Preload:
Factory data must be transmitted and returned via SysEx
dump. |
ROM
Check: Given on power up. |
| A1 |
Initialization:
Hold Write and –1 while turning it on. |
Preload:
Card Load (SPC0A1) |
ROM
Check: Hold Write while turning it on. |
| A2/A3 |
Initialization:
Hold Chain/Effect and B while turning it on. |
Preload:
Hold Up and Down arrows while turning it on. Press |
ROM
Check: Hold Utility, Up and A while turning the unit
on. Press F. Set M/R to M/S and
D/R to D/S. Hold Utility and F. |
| A4 |
Initialization: Battery Removal |
Preload: Hold Bank Up and Write while turning it on. PL appears, press write again. |
ROM
Check: N/A |
| A5 |
Initialization: Battery Removal |
Preload:
Hold Mode Footswitch and Write while turning it on.
Press Footswtich 1, F is dispayed on screen. |
ROM
Check: N/A |
| AX1000G |
Initialization:
Battery Removal |
Preload:
Hold Bank footswitch and Exit button while turning it
on. Press Write button to load the factory programs.
|
ROM
Check: N/A |
| AX100G |
Initialization:
Battery Removal |
Preload:
Hold FX Select EXIT button while turning it on. Press
write button.
|
ROM
Check: N/A |
| AX1500G |
Initialization:
Battery Removal |
Preload:
1. Hold down Bank footswitch EXIT button while turning
it on. Then press Write button.
|
ROM
Check: N/A |
| AX1G/B |
Initialization:
Battery Removal |
Preload:
Hold down the left arrow key and the "+ while powering
on. Then press the "+" button again. |
ROM
Check: N/A |
| AX300G/B |
Initialization:
Battery Removal |
Preload:
Hold Param/Value and Compare/Write while turning it
on. Then Compare/Write once again. |
ROM
Check: N/A |
| C-Series |
Initialization:
Hold MIDI/Transpose and Split buttons while turning it on. |
Preload: Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) |
ROM
Check: N/A |
| CX-3 |
Initialization: Hold Program 2 and 7 while turning it on. |
Preload:
Hold Program 2 and 7 while turning it on. |
ROM
Check: N/A |
| D Series |
Initialization:
System, Disk Utility, Initialize Execute |
Preload:
Backup CDs |
ROM
Check: Given on power up. |
| G3 |
Initialization: Battery Removal |
Preload:
Hold Bank and Write while turning it on. Release both
and then press Write again. |
ROM
Check: N/A |
| i1/i2/i3 |
Initialization:
Hold Edit/Style and Arrange/Play while turning it on. |
Preload:
Disk Load (IFD01P for i3 and i2, IFD02P for i1) |
ROM
Check: Hold Enter and 7 while turning it on. |
| I30 |
Initialization: Hold Arr.Play and Global while turning it on. |
Preload:
Disk Load (I30FD00P) |
ROM
Check: Given on power up. |
| i5S/M |
Initialization:
Hold Arr.Play and Global while turning it on. |
Preload:
Disk Load (IFD00P) |
ROM
Check: Hold Global while turning it on. |
| iS35/40/50/B
i40M |
Initialization:
Hold Arr.Play and Global while turning it on. |
Preload:
Disk Load (IFDD1006 except for iS40 and i40M which is
FDD1007) |
ROM
Check: Hold Disk/Global while turning it on. |
| iX300 |
Initialization:
Hold Arr.Play and Global while turning it on. |
Preload:
Disk Load (IXD00P) |
ROM
Check: Hold Disk/Global while turning it on. |
| KAOSS Pad |
Initialization:
Hold 3, FX and HOLD buttons while turning it on. L appears in screen.
Then press 1,3,5,1,3,5. |
Preload: N/A |
ROM
Check: N/A |
| KARMA |
Initialization:
Hold Enter and 0 while turning it on |
Preload: Disk Load (KMFD00P) |
ROM
Check: Given on power up. |
| M1 |
Initialization: Hold Int, Card and Combi while turning it on. |
Preload:
Card Load (MPC00P) |
ROM
Check: Hold INT while turning it on. |
| M1R/M1REX |
Initialization:
Hold Int, Combi and Prog while turning it on. |
Preload:
Card Load (MPC00P, MPC0EX for EX model) |
ROM
Check: Hold INT while turning it on. |
| M3R |
Initialization:
Hold Edit and No while turning it on. |
Preload:
Global screen 5D “OK”, then select "O.K." |
ROM
Check: Hold Edit and Global while turning it on. |
| MS2000/2000R |
Initialization:
Hold Mod Sequencer On/Off and 3 while turning it on. |
Preload:
Global screen 2D, then select "OK". |
ROM
Check: Hold Mod Sequencer On/Off and 5 while turning
it on. |
| N1/N5/EX |
Initialization:
Test Mode - Hold Enter and 7 while turning it on, then Page>
to skip to "Ready to Boot", press Enter. |
Preload:
Press Utility, select "Factory Reset" then
press Enter. |
ROM
Check: Hold 10s hold and Enter while turning it on. |
| N1R |
Initialization:
Test Mode - Hold Global and Dec- while turning it on, Page> skips
to "Ready to Boot", press Enter. |
Preload: Press Global, Page > to Init. Select "Factory Preload"
then press Enter. |
ROM
Check: Hold Edit/Enter and Global while turning it on. |
| N364/N264 |
Initialization:
Hold Enter and 7 while turning it on. |
Preload:
Disk Load (NSD3) |
ROM
Check: Hold Enter and 7 while turning it on. |
| NX/NS5R |
Initialization: Hold Param. > and < while turning it on. |
Preload:
Enter button, then select Utility, Preset, Factory Preset,
Yes. |
ROM
Check: Hold Param < and> while turning it on. |
| PA80/60 |
Initialization:
N/A |
Preload: Disk Load (6 Disk set available from korgpa.com) |
ROM
Check: Given on power up. |
| Prophecy |
Initialization:
Battery Removal |
Preload: Global screen 19, press Enter. |
ROM
Check: Hold Enter and Exit while turning it on. |
| PX1 |
Initialization:
Battery Removal |
Preload:
Metronome and Enter buttons while powering on. Then
press the "+" button. |
ROM
Check: N/A |
| PX2 |
Initialization:
Battery Removal |
Preload:
Rhythm and Enter buttons while powering on. Then press
the "+" button. |
ROM
Check: N/A |
| PX3/PX3B |
Initialization:
Battery Removal |
Preload:
PX3: Rhythm/Aux
and "+" button while powering on. Then press the Bypass/Tune
button. PX3B: HBB and "+" button while powering on. Then press
Bypass/Tune. |
ROM
Check: N/A |
| PX4/PX4B |
Initialization:
Battery Removal |
Preload:
PX4: Rhythm and UP arrow buttons while powering on.
Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering
up. Then press press Enter/Rec. |
ROM
Check: N/A |
| S3 |
Initialization:
Hold Stop and S1 while turning it on. |
Preload:
Hold Stop and S1 while turning it on. |
ROM
Check: Hold Stop and S4 while turning it on. |
| SG Rack |
Initialization:
Edit and Yes while turning it on. |
Preload:
Global screen 7, then select "O.K". |
ROM
Check: Hold Edit and FX On/Off while turning it on. |
| SGPROX |
Initialization:
Hold Program and Piano 8 while turning it on. |
Preload:
Program Edit mode screen 14 (Each program!) |
ROM
Check: Hold Program and Piano 7 while turning it on. |
| SP500 |
Initialization:
Hold Function and Mixer while turning it on. |
Preload:
Function screen 7. |
ROM
Check: Hold Function and Mixer while turning it on. |
| T Series |
Initialization: Hold Fine and Prog A while turning it on. |
Preload:
Disk Load (TSD00PII) |
ROM
Check: Hold Fine and Program A while turning it on (Will
initialize… back up!) |
| Trinity
Series |
Initialization:
Hold Enter and 0 while turning it on |
Preload:
Disk Load (TFD00P and TFD01P) |
ROM
Check: Given on power up. |
| Triton Classic/ST |
Initialization:
Hold Enter and 0 while turning it on |
Preload:
Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive
contains preload for Studio) |
ROM
Check: Given on power up. |
| Triton LE |
Initialization: Hold Enter and 0 while turning it on |
Preload:
Global mode, F8, Select "Preload" |
ROM
Check: Given on power up. |
| Triton Rack |
Initialization:
Hold Enter and 0 while turning it on |
Preload:
Disk Load (TNRFD00P and TNRFD01P) |
ROM
Check: Given on power up. |
| TRR |
Initialization:
Hold A4 and Edit while turning it on. |
Preload:
Global screen 10, then select "OK". |
ROM
Check: Hold Enter and Yes while turning it on. |
| WS/WSEX/AD |
Initialization:
Power on, wait for "Wavestation" to flash then Cursor
down and 4. Enter Init screen from there. |
Preload:
Card Load (WPC00PI, II and III) |
ROM
Check: Power on, wait for "Wavestation" to
flash then Cursor down and 4. |
| WSSR |
Initialization: Hold Down Cursor, Bank, Edit and Yes while on. Enter Init screen
from there. |
Preload:
Card Load (WPC00PI, II and III) |
ROM
Check: Hold Down Cursor, Bank Edit and Yes while on. |
| X2/X3/X3R |
Initialization:
Hold Page Down and 0 while turning it on |
Preload:
Disk Load (XSD00P) |
ROM
Check: Hold Enter and 7 while turning it on. |
| X5/X5D/DR |
Initialization:
Hold Page + and Page - while turning it on. |
Preload:
Global Screen 5A, then select “OK”. |
ROM
Check: Hold Edit and Global/Multi while turning it on. |
| Z1/Z1EX |
Initialization:
Hold down SW1 and SW2 while turning it on. |
Preload:
Preload screen in global mode. |
ROM
Check: Hold Exit and Enter while turning it on. |
|
|
|
|
