 |
|
|
Record Dry Audio while monitoring FX on the Triton Studio
1) Connect your Ttriton
Studio main L/R output to one stereo input on your mixer, and the individual
1/2 output to another output channel.
2) Connect your headphones to the headphones output on the mixer.
3) Connect your mike to a mike input on the mixer, set the output level to
zero and turn up the aux send level.
4) Connect the aux send on the mixer to the mono input on the Triton Studio.
5) Go to the SAMPLING page of any mode on the Trrton Studio (COMBI, PROGRAM,
SEQ, or SAMPLER) and direct the analogue input to the IFX that you wish to
use for the voice processing.
6) Go to the IFX page and set up the effects, but route the output (in the
INSERT EFFECTS tab) to INDIV 1/2.
Your voice input to the mike will now go to the mixer, get sent through AUX
to the input on the TS, get processed by the insert effects and directed out
INDIV 1/2, which you should be able to hear in your headphones if the mix
volume for that channel on the mixer is turned up...
