|
Click image for larger
picture
-
Compact
chromatic tuner, ideal for brass band or orchestra.
-
High-precision
LCD needle-type meter for stable tuning.
-
Wide
range of pitch detection covers C1--C8.
-
Calibration
function supports a variety of concert pitches.
-
Reference
tone can be produced from an internal speaker. (Sound Out)
-
Auto
Power Off function conserves battery life.
-
Memory
Backup function.
-
Approximately
100 hours of continuous use.
Wide
range of pitch detection
This compact chromatic
tuner supports a broad range of C1 (32.70 Hz)--C8 (4186.01 Hz), allowing
speedy and high-precision tuning of wind, string, keyboard, and other
instruments. This tuner is ideal for tuning even low-register notes containing
numerous overtones that are often difficult to tune. A high-sensitivity
mic is built-in, allowing easy and accurate tuning of acoustic instruments
such as ukuleles. A separately sold CM-100 contact mic can also be used
to send the vibrations directly to the tuner for even more accurate tuning.
Highly
portable and ultra-compact body with a "tilt slit"
Although the CA-30
is small, thin, and light, don’t let its pocket-sized body fool you.
The CA-30 packs the functionality needed for tuning a wide range of instruments.
From studio to stage, tuning is easy and convenient. The back of the unit
includes a unique arc-shaped "tilt slit" that lets you insert a plastic
card for use as a handy stand.
High-precision
LCD meter indicates the detected pitch
The meter section uses
a LCD needle, combining the accuracy of an LCD with the easy visibility
of a needle, and providing a stable display. Additional visual feedback
is provided by LEDs that indicate pitch deviation.
Internal
speaker provides a reference pitch (Sound Out)
In addition to visual
tuning via meter, the CA-30 can play reference pitches from its internal
speaker (Sound Out) for tuning by ear. Each press of the Sound switch
will cycle through the A4--Bb4 notes commonly used for tuning wind instruments.
Or you can hold down the Sound switch to change the cycle to the semitone
intervals from C4 through C5 (one octave), allowing reference pitches
for any instrument to be sounded quickly.
Calibration
function
The Calibration function
(410--480 Hz) supports a wide range of standard pitches, and can be adjusted
in 1 Hz steps for accurate and flexible tuning to any song or key. Thanks
to the Memory Backup function, the Calibration and reference pitch are
remembered even when the power is turned off. (However, these settings
will be initialized when the batteries are replaced.)
Auto
Power Off function
If you leave the unit
powered-on for 20 minutes without performing any operation, the Auto Power
Off function will turn the power off automatically, avoiding unnecessary
battery consumption.
Approximately
100 hours of continuous use
Low-power consumption
design allows an amazing 100 hours (approximate) of continuous battery
life (A4 continuous input, Meter mode, zinc-carbon batteries).
* Even
if the pitch is within the detection range, detection may not be possible
for instrumental sounds that contain a large number of overtones or have
a rapid decay.
CA-30
Specifications
-
Tuning:
12 note equal-tempered
-
Detection
Range: C1 (32.70Hz) - C8 (4186.01Hz) : Sine Wave
-
Reference
Tone: C4 (261.63Hz) - C5 (523.25Hz) : One Octave
-
Tuning
Modes: METER (AUTO), SOUND OUT (MANUAL)
-
Calibration
Function: A4 = 410-480Hz (1Hz steps)
-
Detection
Accuracy: ±1 cent
-
Sound
Accuracy: ±1 cent
-
Connection
Jack: INPUT jack (1/4" mono)
-
Power
Supply: two AAA batteries 3V
-
Battery
Life: Approximately 100 hours (Conventional batteries, Meter mode,
A4 continuous input)
-
Dimensions:
104 (W) x 64 (D) x 15 (H) mm = 4.1" (W) x 2.52" (D) x 0.6" (H)
-
Weight:
0.18 lbs. / 81g (including batteries)
|
